Product Details
1.General introduction:
Powder coatings are mixed with a certain proportion of the resin,
fillers, curing agents and other additives, then prepared by hot
extrusion ,crushed and sieved.The products are stable at room
temperature storage, then baking heat melted and solidified to form
a smooth and bright permanent coating to achieve the purpose of
decoration and corrosion.
2.Feature:
1).The products are non-toxic, solvent-free and non-toxic volatile
substances,
there are no intoxication, no fire, no "three wastes" emissions and
other pollution problems, in full compliance with national
environmental laws.
2).Raw material utilization is high, the highest utilization rate
even more than
99%.
3).After being pre-coated handle, disposable construction, without
primer,
you can get a sufficient thickness of the coating, easy to automate
operation, high production efficiency, reduce costs.
4).Dense coating adhesion, good impact strength and toughness, high
coverage corners, with excellent resistance to chemical corrosion
and electrical insulation properties.
5).Powder coatings storage and transport are safety and
convenience.
3.Product series:
The products include high light ( above 86%),glazed
(76%-85%),matte(20%-50%),low light (below 20%). We also offer a
variety of shiny products according to the needs of users.
4.Powder physical properties:
Proportion : 1.2-1.8 (depending on the color and gloss ) .
Particle size distribution: 100% less than 125 microns (more than
85% between 60 to 90).
Liquidity(180°C):22~35mm.
Curing conditions:200°C,10 minutes.
5.Average coverage:
8-10m³/kg, the membrane is 60μm
(calculate by 100% utilization rate of powder coating).
6.Packing:
Carton packaging, lined with double polyethylene bag, net weight 25
kg.
7.Storage requirements: Store below 30 °C, ventilated, dry, clean room, not near the fire,
heat, direct sunlight, open dumps is prohibited.Under this
condition, the powder can be stable for 12 months, more than the
storage period may be re-examined, such as the results meet the
requirements, can still be used.
8.Health and safety:
This product is non-toxic. In the course of inhalation of dust
should be avoided. The operators should wear appropriate dust mask
and glasses.
9.Coating performance
Coating performance |
Test items | Inspection standards | Test indicators |
High light | Glazed/Matte/Low light |
Impact resistance | ISO6272 | GB/T1732-1993 | 50kg/cm | 40kg/cm |
Cupping test | ISO1520 | GB/T9753-1988 | 8mm | 7mm |
The adhesion (grid method) | ISO2409 | GB/T9286-1998 | 0 |
Bending | ISO1519 | GB/T6742-1986 | 2mm | 3mm |
Pencil Hardness | ASTMD3363 | GB/T6739-1996 | 1H-2H |
Salt spray test | ISO7253 | GB/T1771-1991 | >500 hours |
Damp heat test | ISO6270 | GB/T1740-1979 | >1000 hours |
Heat resistance | 110°C/24 hours(white) | Good gloss retention,E≤0.3-0.4 |
Florida weathering exposure | ISO2810 | South 45 °,12mons | Gloss retention≥50% |
Artificial accelerated aging | 60°C/8hours + 50°C/4hours condensing,cycle for 500hours | Gloss retention≥50% Color stability:E≤0.35 |
|
Annotate: | 1.The above experiment uses 0.8mm steel with degreasing and
rusting, and the coating thickness are 50-70 microns. |
| 2.The above coating performance may be lower as shiny and slightly
lower. |
11.Why choose our products?
1). We have our own factory. The good quality and the competitive
is the advantage of our company.
2). The material we choose is always good and products always come
out with high quality.
3). A trial order or sample orders are welcomed.
4). Our products are exported to Europe, America, Southeast Asia,
and other countries and regions in the world.
5). We will do our best to service you all the time if you have the
further question.
12 . FAQ
(1) What powder we can manufacture?
We can do almost all the RAL and PANTONE colors;
We can do almost all the finish powder, like smooth, texture,
structure etc.
We can do a lot of special powders, like conductive powder,
Insulation powder, Soft touch powder, Anti-graffitti powder,
Zinc-Rich powder, super thin powder etc.
(2) Our Packing: 25kg / box
Box Size: 40 * 25 * 33 cm (L * W * H)
Pallet size: 1.1 * 1.16m Material: Plywood
(3) Our MOQ: Usually 200kg/ Color
(4) Delivery Time: Usually send out the goods within 1~ 15 days.
(5) Can we get some samples from you?
Yes, we can supply you 1-2 kg powder samples for your testing, but
we need you to pay the freight firstly.
(6) How can we get the quotation?
Please send us your technical data or let us know your requirement
as following: Color, Powder Type, Gloss, Surface and other
performance requirements .

Company Profile
Jinhu Color Powder Coating Co.Ltd
Jinhu Color Powder Coating Co.,Ltd with brand FEIHONG founded in 1993,is a rapid growing
enterprise who integrate the production and marketing of thermoset
powder coating.After 28 years' effort and development,now we have
become one of the leading powder coating,powder paint manufactures
and suppliers in China.
We are always keeping kind relationship with our distributors and
end users around the world,and enjoy high reputation in powder
coating industry domestically and internationally.
Feihong factory focus on formulating kinds of electrostatic powder
coatings,which include epoxy,epoxy polyester (Hybrid),pure
polyester,polyurethane powder coating for indoor,outdoor
application.With advanced production lines and professional
technology,besides the regular powder paints,we do very well in
bonding powder paint,metallic powder paint and textured powder
paint,which are widely used in metal surface coating for decorative
and protective purpose.The products are successfully exported to
more than 48 countries.
But Feihong have never stop going forward,in order to control the
cost and supply competitive price,better in-time service for our
European customers,in 2017 we built another factory in Europe,which
is for producing powder coating and exibiting the color sample
panels to customers nearby.
For meeting customers' specific color requirements,color matching
and tailor-made service are provided before placing bulk order.
We take "Quality, Service, Innovation, Efficiency" as a market
philosophy, and introduce the first-class equipment, advanced
testing device to ensure output prenium products, and serve all
customers with best and instant service .
Continuous quality improvement in products is FEIHONG's only goal
to meet and exceed customer expectations.