180MM Sintered Turbo Grinding Head Diamond Cup Wheel , Concrete Grinding Wheel

4.5'' Diamond Cup Wheel Sintered Turbo Grinding Head Cup Wheel For Granite

Edge grinding wheel, diamond of the present invention includes edge grinding wheel and grinding wheel base, also includes the first ring fixed plate, the second ring fixed plate, a fixed rod and bar, edge grinding wheel substrate including the first substrate and the second substrate, as described in the first substrate and the second substrate are half cylinder barrel and its shape are the same size.

the first substrate and the second substrate contact surfaces are parallel to the smooth surface, the first substrate and the Settings in the left side, a second substrate in the first part described the body wall and the second substrate side respectively contact with about grinding wheel shaft at both ends, as described in the first ring fixed plate backend inside contact with the grinding wheel spindle front end.

First ring fixed plate around the front end of the lateral ends with the first substrate and the second substrate front inside contact, described the fixed rod set up have much group, fixed pole and group were set around after the first annular plate fixed on the end of the lateral, described the first substrate and the second substrate front inside are surrounded with match the first fixed link of the first on the hole, and after multiple sets of the fixed rod end inserted into the group up to the first 1 hole respectively, described in the second ring fixed plate after inside of the front and grinding wheel contact, the second ring fixed plate around the front end of the lateral ends with the first substrate and the second substrate respectively the backend inside contact, described rod set how groups,Moreover, multiple groups of inserting rods are arranged around and arranged on the outside of the front end of the second ring fixing plate.

The rear end of the multiple groups of fixing rods is provided with slots matching with the inserting rods, and the front end of multiple groups of inserting rods is respectively inserted into multiple groups of slots.Two groups of left screws and two groups of right screws are also included.

The two groups of left screws are respectively threaded through and mounted on the upper left side and the lower left side of the front end of the first fixing plate, the first matrix and the second fixing plate, and the two groups of right screws are respectively threaded through and mounted on the upper right side and the lower right side of the front end of the first fixing plate, the second matrix and the second fixing plate.

The diamond edge grinding wheel of the invention also includes two groups of left nuts and two groups of right nuts, the two groups of left nuts are respectively screwed on the output end of two groups of left screws, and the two groups of right nuts are respectively screwed on the output end of two groups of right screws.The diamond edge grinding wheel of the invention also includes two sets of left auxiliary pieces and two sets of right auxiliary pieces, which are respectively arranged in front of two sets of left screws and two sets of right screws.

The diamond edge grinding wheel of the invention is provided with a cross groove structure at the front end of the two groups of left auxiliary pieces and the two groups of right auxiliary pieces.The diamond edge grinding wheel of the invention is provided with an antiskid sleeve on the inner wall of the slot, and the outer side wall of the insert rod is in contact with the inner wall of the antiskid sleeve.

Compared with the prior art, the beneficial effect of the present invention is as follows: through the above setting, the base of the grinding wheel can be removed from the grinding wheel shaft and replaced to facilitate the grinding of different components according to different conditions;Moreover, by removing the first fixed plate and the second fixed plate from the first matrix and the second matrix, only the matrix of the grinding wheel can be replaced and resources can be saved.

The appended drawings showFIG. 1 is a structural diagram of the invention;Figure 2 is the external schematic diagram of figure 1.Figure 3 is the right view of figure 1;FIG. 4 is A partial enlarged view of part A of FIG. 3.1. Grinding wheel shaft;2. Matrix of edge grinding wheel;3. The first ring fixing plate;4. The second ring fixing plate;5. Fixed rod;6. Inserting rod;7. The first matrix;8. The second matrix;9. Left screw;10. Right screw;11. Right nut;12. Right auxiliary film;13. Non-slip sleeve.Specific mode of implementationThe following is a further detailed description of the specific embodiment of the invention in combination with the attached drawings and embodiments.

The following embodiment is used to illustrate the invention without limiting its scope.As shown in FIG. 1 to FIG. 4, the diamond edge grinding wheel of the present invention includes the grinding wheel shaft 1 and the edge grinding wheel matrix 2;Also includes the first ring fixed board 3, the second ring fixed board 4, fixed rod 5 and inserted rod 6, edge grinding wheel 7 and 8 second matrix substrate includes the first matrix, and the first substrate and the second substrate are half cylinder barrel and its shape are the same size, the first substrate and the second substrate of the contact surfaces are parallel to the smooth surface, the first substrate and the Settings in the left side the second substrate, the first part the body wall and the second substrate inside wall respectively with grinding wheel on each contact, the first ring fixed plate backend inside contact with the grinding wheel spindle front end, the first ring fixed plate around the front end of the lateral ends with the first substrate and the second substrate respectively front inside of the contact,Fixed link set how group, fixed pole and group were set round after the first annular plate fixed on the end of the lateral, the first substrate and the second substrate front inside are surrounded with match the first fixed link of the first on the hole, and group fixed link back-end respectively inserted up to the first on the hole, the second ring fixed plate after inside of the front and grinding wheel contact, the second ring fixed plate around the front end of the lateral ends with the first substrate and the second substrate respectively the backend inside contact, thrust rod set how group, and inserted link more group were set up in the second ring round the plate on the front end of the lateral, fixed pole back-end more group were set a match the inserted bar slot,The front end of multiple groups of inserting rods is inserted into multiple groups of slots respectively;Two groups of left screw 9 and two groups of right screw 10 were also included. The left screw in the two groups was threaded and mounted on the upper left side and the lower left side of the front end of the first fixation plate, the first matrix and the second fixation plate, respectively.

The right screw in the two groups was threaded and mounted on the upper right side and the lower right side of the front end of the first fixation plate, the second matrix and the second fixation plate, respectively.Through the above setting, the substrate of the grinding wheel can be removed from the grinding wheel shaft and replaced to facilitate the grinding of different components according to different conditions;Moreover, by removing the first fixed plate and the second fixed plate from the first matrix and the second matrix, only the matrix of the grinding wheel can be replaced and resources can be saved.The diamond edge grinding wheel of the invention also includes two sets of left nuts and two sets of right nuts 11. The two sets of left nuts are respectively mounted on the output end of the two sets of left screws, and the two sets of right nuts are respectively mounted on the output end of the two sets of right screws.Through the above setting, two groups of left screws and two groups of right screws can be relatively fixed.

The diamond edge grinding wheel of the present invention also includes two sets of left auxiliary pieces and two sets of right auxiliary pieces 12, two sets of left auxiliary pieces and two sets of right auxiliary pieces are respectively arranged at the front end of two sets of left screws and two sets of right screws.Through the above setting, it is convenient to rotate two groups of left screws and two groups of right screws, so as to take out two groups of left screws and two groups of right screws.The diamond edge grinding wheel of the present invention is provided with a cross groove structure at the front end of two groups of left auxiliary pieces and two groups of right auxiliary pieces.Through the above setting, two groups of left screw and two groups of right screw removal methods can be added to improve the practicability.

The diamond edge grinding wheel of the invention is provided with an anti-skid sleeve 13 on the inner wall of the slot, and the outer side wall of the insert rod is in contact with the inner wall of the anti-skid sleeve.Through the above setting, the friction between the rod and the slot can be increased to improve the stability.The diamond edge grinding wheel of the invention only needs to set the grinding wheel shaft on the rotating shaft of the grinding equipment when in use, and then contact the components with the outer surface of the rotating edge grinding wheel matrix to polish the components.To replace the base body of the grinding wheel, first screw off two sets of left nuts and two sets of right nuts, then screw off two sets of left screws and two sets of right screws, and then remove the first fixing plate and the second fixing plate from the first matrix and the second matrix, and then replace the base body of the grinding wheel.

The above is only the preferred embodiment of the invention, and it should be pointed out that for ordinary technicians in the technical field, some improvements and variations can be made without deviating from the technical principles of the invention, which should also be considered as the protection scope of the invention.

Smooth grinding and finishing of construction material surface

Features:With aluminium base grinding wheel is for fast grinding surface and shaping.

Application: Granite, marble, concrete, masonry

Machinery: Angle grinder

Different arbor sizes and segment specifications are available upon request

Hebei XMF Tools(Hebei new high-technology enterprise) is located in the historic city--Zhengding. It is founded in 1994 and occupies 253300 squares. Our main products are diamond saw blade, diamond drill bit, polishing pad and special metal fiber which used for spaceflight, fabric, national defense and environmental protection areas. The company has set up offices in most large cities. Its sale network has covered the whole China, and more than 30 countries in Europe, America and Asia. “XMF” has been recognized as “China Famous Brand” and “Hebei Well-known Brand”.

XMF tools has rich experience of scientific&technology development, abundant production strength. With provincial enterprise technology research and development center, a number of national patents, XMF tools is specialized in diamond tools, metal fiber ,three categories of more than 1000 varieties product systems. Among of the systems, many products were listed in new products development schedule.The main products have been certificated by MPA Germany. XMF Tools was the first one to certificate ISO9001:2000 by China Quality Control System and brought in advanced SAP manage system. The manage pattern and concept are in line with the international standards.

The 1^st Ex suit expansion project and 2^nd cooperation with China University of Mining and Technology about the high-tech diamond tools and metal fiber are all listed as key projects of Hebei Province.The technology reforming and innovating will promote diamond tools industry to raise up fundamental technology revolution. And it has positive significance for improving the total technical level of diamond tools manufacturing industry and metal fabric manufacturing industry.It plays a positive leading role in promoting related industries upgrade. After the completion of the project, XMF Tools will be the city of diamond tools with a certain scale and first-class level, and No.1 in Asia and leading company in the world.

Obey the concept of “Easy and quick feeling”, XMF Tools will constantly innovate and sustainably develop, strives to be international famous enterprise.