
Punch Automatic Feeder, Bar Feed Processing Machine, Ruihui Stamping, velcro cutting machine, pv module production line
The automatic feeder refers to the active operation according to
the rules and the established procedures. The person only needs to
determine the requirements and procedures of the operation, and
does not have to directly operate the feeding organization.
That is, the article is sent from one direction to another, and the
process can actively and accurately complete the organization
without human intervention.
Generally, there are testing equipment, feeding equipment, and the
like. It is mainly used for the transportation of various materials
and semi-products of industrial products, and can also cooperate
with the next process to make production active.
The working principle of the automatic feeder is as follows:
The automatic feeding machine of the punching machine is simple and
convenient to operate and has high precision. As long as the feed
rate is set on the touch screen during operation, the servo system
actively determines the feed length for each time according to the
value set earlier, and the operator only needs to watch whether the
machine is working normally without having to adjust each time.
The automatic feeding machine of sawing machine is controlled by
Siemens PLC and Siemens touch screen, and the imported servo motor
is used to control the feed feeding.
The PLC system controls the active feeding action, the active
clamping action and the active cutting action. The selection of
this machine can greatly reduce the labor intensity of the operator
and supply production efficiency.
There are some subtle differences in the operation principle of
different types of feeders, but the overall principle is similar.
For the roller feeder, it consists of five parts: the distribution
equipment, the transport wheel, the transmission rod, the bracket,
and the control circuit. The dosing device discharges the bar to
the transport wheel one bar at a time, and the transport wheel
feeds the bar into the grinding zone.
During the operation, the bar is placed above the transport wheel.
When the bar is worn and rotated, the bar friction is reduced in
the condition of the rotation of the transport wheel, thereby
improving the wear accuracy.
The vibration and noise during operation are very small, especially
suitable for long bar and fine workpiece processing. At that time,
the increasingly widely used roller type automatic feeders at home
and abroad were able to be used in various types of centerless
grinding machines.
After the cooperative processing machine tool completes the active
feeding operation, after the bar material transportation of the
storage box is finished, the machine tool actively waits for the
feeding condition, and the warning device informs the operator to
add the material.
The cooperation of the feeder is applied to punching machines,
continuous molds, injection molding machines, and robots.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi