
LDP Model single girder EOT overhead crane is equipped with
electric hoist as light small lifting equipment which has traveling
orbit. It's improved and redesigned on the basis of LD Model,
compared with LD Model, its structure is more reasonable and the
whole crane rigidity is stronger.
Use and applied occasions:
It's extensively applied in plants, warehouses, material stocks,
and some other different places to lift goods. But it's prohibited
to use the equipment in the combustible, explosive or corrosives
environment.
Features:
Tight dimension, low building headroom, light dead weight and light
wheel load.
It is a light duty track traveling crane with trajectory which
applies to and used at machinery, assembling sites and warehouses.
This product adopts ground control and works at a temperature of
-25--40 centigrade. It is prohibited to use the equipment at
combustible, explosive or corrosive environment.
The crane applies to works and storehouses where it is ≥100 mm
height between the rail surface and the rafter of roof truss.
The trolley forms a set with electric hoist, The mechanism of crane
is nimble, with safe and reliable motion. It is capable of
designing and making non-standard hoisting equipment.
Single Girder Overhead Crane Drawing
Lifting capacity (T) | 1, 2, 3, 5, 10T | 16, 20T | |||||||||||
Span(M) | 7.5-22.5M | ||||||||||||
Crane traveling mechanism | Traveling speed(m/min) | 20 | 30 | 45 | 60 | 75 | 20 | ||||||
Reducer ratio | 58.78 | 39.38 | 26.36 | 19.37 | 15.88 | 58.78 | |||||||
Motor | Model | ZDY21-4 | ZDY21-4 | ZDY122-4 | |||||||||
Power(kw) | 2× 0.8 | 2× 1.5 | 1.5× 2 | ||||||||||
Rotation (m/min) | 1380 | 1380 | |||||||||||
Lifting mechanism (electric hoist)& electric hoist traveling mechanism | Electric hoist model | CD1/MD1 | MD1/HC | ||||||||||
Lifting speed (m/min) | 8, 8/0.8 7, 7/0.7 | 3.5 3.5/0.35 | |||||||||||
Lifting height (m) | 6, 9, 12, 18, 24, 30 | 12, 18, 24, 30 | |||||||||||
Traveling speed (m/min) | 20(30) | 20(30) | |||||||||||
Motor | Taper Squirrel-cage type | Taper Squirrel-cage type | |||||||||||
Work duty | A3-A5 | ||||||||||||
Power supply | 380V 50HZ three phase | ||||||||||||
Wheel diameter | 270mm | 370mm | |||||||||||
Width of trail | 37-70mm | 37-70mm |