High Defination Automatic Flexo Printer Die Cutter With Stacker Machine

High Defination Lead Edge Flexo Printer Slotter Machine

This machine is composed of paper feeding, printing, die cutting, stacking, etc. It can complete the printing and die cutting of three-layer and five-layer corrugated cardboard at one time.
1. Wall panel thickness 50mm, material is HT250, process: medium frequency tempering internal stress, increase wall panel density, hardness, strength, toughness, and conductivity, artificial aging treatment, large processing center pair processing, high strength, High precision, never deformed.
2. The transmission system adopts large helical angle helical gear transmission, which has low noise, enhances the strength of the gear, and improves the transmission stability of the gear. All transmission gears are made of 40CrMnTi high-quality alloy steel, which is quenched and tempered by high-frequency quenching, super hard processing and fine grinding. It has high strength and durability. The whole machine adopts closed spray lubrication and oil balance device to ensure the gears are highly lubricated forever.
3. The bearing adopts international imported high quality brand-name bearings. One by one inspection, qualified to enter the warehouse.

Lead edge

1, printing roller
1) Printing roller ¢ 405.6 (including diameter ¢ 410)
2) Seamless steel pipe material, surface grinding, hard chrome plating.
3) Balance correction and smooth operation.
4) Ratchet fixed coil plate shaft, full-hanging grooved hanging plate. It is equipped with a hanging correction function, which saves the hanging time and improves work efficiency.
5) When loading and unloading plates, the electric control of the foot switch is reversed.
6) Phase adjustment: The printing roller is equipped with automatic zero return device, and adopts PLC multi-function touch screen control, touch screen man-machine interface, click to enter the plate roller phase adjustment interface; with automatic zero return, automatic plate and preset print position, etc. Features.
7) The axial adjustment is electric adjustment, and the adjustable distance is 10mm each.
2, embossing roller
1) High-quality seamless steel pipe, which is made by deep hole boring and boring.
2) The outer diameter of the stamping stick is ¢154mm.
3) High frequency hot loading, double disc welding.
3) Balance correction, remove the centrifugal force and run smoothly.
4) The embossing roller gap dial shows electric adjustment, the adjustment range is 1-11mm, and it is connected by the cross slider. When adjusting, the transmission gear will always ensure the correct position to engage.
3. The ceramic anilox roller adopts Jiangsu Haili Company to produce high-quality ceramic anilox roller, and the cable can be selected from 350-600 lines/inch.
1) The outer diameter of the net stick is ¢212mm.
2) The dots are consistent and the ink is evenly distributed.
3) The anilox roller gap dial shows electric adjustment, the adjustment range is 1-8mm, and the cross slider is used for connection. When adjusting, the transmission gear will always ensure the correct position to engage. (The cross slider is a bearing type cross slider)
4) Pneumatic lifting net roller prevents the ink from drying out when the printing plate is repeatedly inked and the machine is stopped for a short time.
5) This machine adopts the domestic famous brand Guangdong Keruo stable scraper system.
4, the ink chamber
1) It is made by Guangzhou Kerou Machinery Equipment Co., Ltd.
2) Innovative chamber fluid dynamics and ink seal design, good ink transfer effect, and more ink saving.
3) Air pressure or cylinder adjustment lock, scraper wear automatically compensates, so that the anilox roller and the squeegee fit better to obtain the best squeegee effect.
4) All-round installation design can replace any old-fashioned rubber roller or single scraper system.
5, ink system
1) Ink is applied by pneumatic two-way diaphragm pump, the ink supply is stable, and the operation and maintenance are simple.
2) Ink cup to prevent ink splashing and venting,
3) Stainless steel ink fountain, automatic cycle cleaning and automatic inking.
4) The equipment is equipped with an ink-deficient alarm system, which has high and low liquid level detection. If the ink quantity is insufficient, the alarm bell will be automatically sounded, and the ink quantity will be fully suspended.


Die Cutter Unit

1. Pressure roller
1) The shaft diameter is 85mm, seamless steel pipe, after two grinding processes, the surface is plated with hard chrome and the movement is stable.
2) The pressure dial wheel dial shows electric adjustment. The adjustment range is 1-10mm. It is connected by the cross slider. When adjusting, the transmission gear will always ensure the correct position.
2, pad roller
1) Rubber pad roller Φ434.2 unknown mm (excluding superior rubber pad)
2) Alloy structure seamless steel pipe processing and grinding, hard chrome plating.
3) Youli rubber pad thickness 8mm. (outer diameter 450mm) width 250mm, under normal circumstances, 6 million times.

CHINA YIKE GROUP CO.,LTD

was established in January of 2002, which is a high-tech enterprise, manufacture and sales of high level automatic corrugated cardboard production line, flexo printer slotter die cutter machine, Casemaker.

Our Group implement the ISO 9001-2008, in strict on factory management. All products series pass CE certification.

YIKE GROUP. with professional technology, serious management, and advanced equipment, we provide high quality products and timely aftersale service.

We devote to be the World leading partner of the corrugated packaging industry, more than 200 machines running in customer sites in UK, Italy, Spain, Saudi arabia and so on. Thousands machines in China domestic market.

Yunxiang carton machinery factory Co., Ltd. wish to achieve resplendence with you hand in hand, shoulder to shoulder in the future.

cangzhou yike carton machinery manufacturer.

Any inquirement, pls contact with us asap.

Thanks.

Anna Tang

Email: Anna@yikegroup.net

Wechat/whatsapp: 008613363699514