Heavy weight Sectional Conveyor Belt Vulcanizer With E Type Cross Beam

Heavyweight Sectional Conveyor Belt Vulcanizer With E Type Cross Beam

Sectional Vulcanizing Press Aaasvp-E

New type Vulcanizing Press with E type cross beam, one kind of heavyweight vulcanizer, use new design components, include flexible pressure bag, traverse bars with standard heating platen and controller. Learn from Canada brand similar products.

What’s Aaasvp-E series and what it can do:

The Aaasvp-E sectional has uniform pressure bag and aluminum/steel bolt and high-grade aluminum platens and beams with high safety grade.

This belt joint/splice system designed to be portable and easy to set-up and remove from the site. We can manufacture to all sizes and pressure up to 1.8 Mpa or more required for different fabric belts and steel-cord belts.

TECHNICAL PARAMETERS

• Water pressure bag (also can use air pressure) Press for 100PSI, 200PSI etc. surface pressure for textile and steel cord belts, Up to 1.8Mpa/2.0Mpa.
• 100 p.s.i. (7 kg/cm sq.) units mostly suitable for splicing fabric ply belting
• 200 p.s.i. (14 kg/cm sq.) units usually used to do steel cord conveyor belting
• Max Belt width: from 650mm to 3000mm
• Different heating platen size and combination.
• Degree of the heating platen: 22 degree bias angle or 16 degree, 20 degree, rectangle and other degree is optional.
• Power Voltage: 380V. 660V. 525V480V. 440V. 415V. 400V or 220V
• Vulcanizing temperature:145℃ (adjustable 0~200℃)
• Temperature-rising time (from normal temperature to vulcanizing temperature): no more than 25 min, accords to different conditions, actually, normal conditions, is around 20 mins.
• Improved cooling system, when use pressure pump for cooling, cooling time only 5mins (cooling from 145 to 75 degrees)

*********************************************************

When order, pls supply below information, our technician will make a solution for you, or pls choose one model from bottom traditional sizes table

1. Max belt width
2. Heating platen length (or pls supply belt manufacturer’s recommended splice length)
3. What kind of belt, light duty belts or heavy duty belts, belt model No.
4. Working Voltage
5. Pressure requirements (as our experience, normal is 0.8Mpa, for EP belts is 1.2Mpa, for steel cord belts is 1.4Mpa)
6. Degree of heating platen (standard will be 22 degree)

Normal vulcanizer model sheet:

A=Length of platen along belt

B=Width of platen across the belt on the bias

C=Right angle dimension across the belt, plus edge overlap

D=Bias angle

E=Max Splice length

200 PSI(14kg/cm sq.) units suitable for splicing steel cord conveyor belting.

Note:

1. Specifications are subject to change without notice;
2. Build-in cooling standard on all units;
3. Total weights include electrical control panel, cable set and set up templates for all models;
4. 200 PSI models include fluid pressure pump and reservoir unit Model HPP20-4(mandatory for operating pressure above 100PSI/7 kg/cm sq);
5. Temperature adjustable between 0-199deg.C;
6. Sectional vulcanizers are built on a 22 degree bias, 16/20 or other degree are optional;
7. Custom sizes, rectangular configurations and multiple platen arrangements available on request.

Main Componets:

1. Aluminum Frame (Spanner Bars), made of high quality aluminum are engineered for any belt width or operating pressure. From EA up to E380.

EA BEAM

2. It is using high strength steel bold and nuts with special machining to provide safe connection.
Improved restraining system is simple and easy to use, protect against hazards that might result in the event of a bolt failure.

3. Lightweight aluminum platens use new rapid cooling system within platens.

4. Custom sizes, rectangular configurations and multiple platen arrangements are also available on request.

5. Harting electric plug & socket help us to reach CE and American, Australia standard.

6． Pressure bag system, can used for both water and air, one time molding, without metal frame, light weight, testing pressure out of our factory is 2.5MPA (old design pressure bag fixed with metal frame and bolts, heavy weight)

7.Automaitc control panel: with time control and digital temperature control. All the parts use high quality electric devices with CE certificated.

In case of electronic controller failure, manual operation is possible as well.

8. Pressure: A. Automatic pressure pump with pressure gauge, allows easy application of pressure up to 200PSI. For steelcord belting, standard will be auto pressure pump. After use new cooling system in the heating platen, now also use pressure pump for cooling. B. Cooling pump , when work with air compressor, air pressure, no pressure pump, such cooling pump can used for cooling. (Pls note that, if have any special requirements of the cooling pump working voltage, pls inform us before order, standard voltage is 220V single phase) C. Manual Pump: manual water pressure

Usually we provide the packing list as following:

Qingdao Leno Industry has been focusing on conveyor belt splice equipment and process technology since 2001. Our professional and aspiring team has made a number of milestones in designing machines for belt vulcanization process.

We are committed to providing advanced rubber belt vulcanization equipment and total solutions for our customers. As the most qualified Chinese partner in belt hot joint equipment, Antai continues to serve many top 10 conveyor belt manufacturer. Assisting by cooperating with our clients and averting potential troubles through our experience we can help in many facets.

We can be reached via email, telephone, and fax. We are bilingual, easily accessible and readily available. Always glad to help you when you need.