Product Details
10/100/1000M One TO One Managed Media Converter with Single mode
Dual Fiber 20km
Overview
10/100M, 10/100/1000M IEEE802.3ah OAM manageable Ethernet Fiber
Media Converter can supervise the real time situation of remote
manageable fiber media converter and set the functions. With this
system, the response speed of the operator is quickened, the daily
maintenance and network expenditure of the operators are reduced,
and the serving quality of them is enhanced.
Features
- Built-in IP-based Web Interface
- Supporting remote and local management
- Supporling IEEEE 802.3X Frame Flow Control for Full-Duplex mode
- Store and Forward mechanism
- Manual IP address setting/DHCP client for IP address assignment
- SNMP v1 / v2c monitor / private Enterprise MIB
- Event trap and SNMP trap support
- Speed duplex mode configuration / Flow Control setting / bandwidth
Control on TP / Fiber port
- Supports Port Status / Ethernet Statistics on both TP and Fiber
intertace
- Supports Maximum frame size to 16K bytes
- Loop detection / Broadcast / Multicast / Unicast storm control
- Management VLAN / 16 IEEE 802.1Q VLAN groups / Q-in-Q VLAN
- 802.1p Tag Priority / IP address priority / IP DSCP option in
- Quality of Service Mode and Strict Priority / Weighted Round Robin
(WRR) QoS policies
- TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test
- 16 TCP / UDP Filter groups
- Password setting, IP setting and devices description setting
through Planet Smart discovery utility
- Firmware upgrade via remote Web interface
- External DC 5V 2A power supply
- LED indicators for easy network diagnosing
- Reset Button at the front panel for the factory default reset
- Choice of fiber-connector from SC, LC, WDM, multi-mode /
single-mode fiber /1000Base-SX / LX mini GBIC module
Technical Indexes
Standards &Protocols | IEEE802.3x full duplex on 10BaseT, 100BaseTX,1000BaseT
IEEE802.3-2002 |
IEEE802.3u 100BaseTX IEEE802.3ab 1000BaseT IEEE802.3z 1000BaseX
IEEE802.3ah-2004 |
IEEE 802.1d Spanning Tree |
IEEE 802.1w |
IEEE 802.1p Qos |
IEEE 802.1q VALN TAG IEEE802.3X Flow control |
Connector | ST, SC, FC, LC |
Operating wavelength | 850nm, 1310nm at Multi-mode; 1310nm, 1550nm at single mode |
Optical fibers | Multi-mode: 50/125,62.5/125,100/140um; Single-mode: 8.3/125,8.7/125,9/125,10/125um |
Management port | 1 console (RJ45) |
Serial port configuration | 9600bps/8bit/none parity/1 stop bit/none low control |
User port | 10/100BaseTX 10/100/1000BaseTX (RJ45), Full/Half duplex; |
100Base-FX 1000Base-FX(SFP module) |
Fiber link option | Dual fiber/single fiber (WDM) |
Max frame size | 1518 Bytes (100M);9728 Bytes (1000M) |
Transmission distance | Dual fiber: up to 100km |
Single fiber: up to 80km |
Band width management | Support bandwidth control by step of64Kbps (N*64K) |
LLCF | Support Link loss carry forward (LLCF) |
Q-in-Q | Q-in-Qfunctionality(addanotherouter9100tag)makes the customer
packets tunneled and unmodified through the providers network by
using a provider configured 802.1QVLANtags,alleviating the burden
of aggregation switch |
IEEE802.3ah OAM standard function | LNK-102OAM/LNK-103OAM Series series has two working modes: Master
and Slave. Central Office device works at Master mode, and Customer
Premise device at Slave mode. The OAM functions are originated by
Master device. |
Link monitoring | Report local events to remote device, including Critical Event
(voltage and temperature abnormal) and Dying Gasp (power down). |
OAM discovery | Check if remote device has implemented/enabled IEEE802.3ah OAM
function, and negotiate with remote device |
Working Temperature | 0℃~60℃ |
Working Humidity | 5%~90%(non-condensing) |
Storage Temperature | -10℃~70℃ |
Storage Humidity | RH: 5~90% non-condensing |
Power supply | 85VAC~265VAC or -40VDC~-57VDC |
Power consumption | ≤5W |

Company Profile
E-link China Technology Co., Ltd.
Established in 2001& headquartered in Shenzhen, E-link China
Technology Co., Ltd. (E-link) is a leading Fiber Optic
Communication and CCTV Security Transmission product manufacturer
in China. Our main products include active equipments including
fiber media converters, CCTV fiber converters, CCTV over Ethernet
Converters (HD-SDI over Ethernet, HDMI over Ethernet, Power over
Ethernet), etc. With rich experience in providing high quality
products in telecom and CCTV business, E-link has a large
manufacturing base in Shenzhen, able to deliver cost-effective
solutions to serve our customers successfully.
E-Link Quality:
• ISO9001 Quality System
• Full-Spectrum environment and electrical testing of all product
design
• 48 hours aging test before delivery
• Qualified CE, RoHS, FCC
Since the launch of our products on the domestic market and
international market, we have won a good reputation for our high
quality products and sincere services. Our products are widely
applied to network systems of Telecom, Radio and Television, Public
Security, Bank ,ect. To be in line with different needs of
different customers, we have people to trace the latest market
information so as to keep our products competitive and vital.
Our knowledgeable sales, technical support and engineering staff
are dedicated to understanding your requirements and designing
products & solutions to meet your needs. We shall be pleased to
provide you fiber optical network products with our best price,
superior quality and fast delivery.